<big id="tv3px"><th id="tv3px"><progress id="tv3px"></progress></th></big>
<cite id="tv3px"><track id="tv3px"></track></cite>

<noframes id="tv3px">
<menuitem id="tv3px"><address id="tv3px"><sub id="tv3px"></sub></address></menuitem>

      <address id="tv3px"></address>

        <sub id="tv3px"><progress id="tv3px"><i id="tv3px"></i></progress></sub>
        <pre id="tv3px"></pre>
        PRODUCTS
        Your position:Home>Products>NFM-H1080 Automatic Vertical Laminating Machine with Hot Knife

        PRODUCT DESCRIPTION

        NFM-H fully Automatic Vertical High-precision and multi-duty laminator as a professional equipment used for plastic film laminating on the surface of paper printed matter. Widely applicable for laminating in packaging, paper box, books, magazines, calendars, and commercial cards fields, Improving the printing matter grades, and achieve the purpose of dustproof, waterproof, oil proof. it’s the best choice for printing and laminating enterprises of all scales.



        SPECIFICATION

        Model

        NFM-H

        Max. paper size-mm

        1080×1100

        Min. paper size-mm

        360×290

        Speed-m/min

        10-90 (thickness of the paper, variety, and glue quality

        Paper thickness-g/m2 (round knife slitting)

        80-500 (easy adjust above 100gms, E type corrugated)

        Paper thickness-g/m2  (hot knife slitting)

        ≥115gms (paper quality good, 105gms is ok)

        Overlap precision-mm

        ≤±2

        Film thickness (common micrometer)

        10/12/15

        Common glue thickness-g/m2

        4-10

        Pre-gluing film thickness-g/m2

        1005,1006,1206 (1508 and 1208 for deep embossing paper)

        Non-stop Feeding height-mm

        1150

        Collector paper height (incl. pallet)-mm

        1050

        Power

        380V-50Hz-3P

        Roll working pressure-Mpa

        15

        Vacuum pump

        80psi

        Cable thickness-mm2    

        25

        Weight

        9800kgs

        Dimension (layout)

        8400*2630*3000mm

        Loading 

        One of 40” HQ

        Remark: accept customize large size of the machine depend on customer need. 
        1050*1250; 1250*1250mm; 1250*1450mm, 1250*1650mm

        FEEDING UNIT
        1.4 suckers for lifting and 4 suckers for conveying structure. Max Speed 12000 sheets/h
        2.The paper feeding table has upper and lower over-limit protection
        3.The height of non-stop feeding can reach 1150mm, pre-stacking device, non-stop feeding

        CONVEYING TABLE AND OVERLAP
        1.The conveying table adopts customized stainless steel corrugated board
        2.The brush wheel and rubber pressing wheel move smoothly
        3.Servo motor overlap, improve accuracy of lap, error≤±2mm

        LAMINATOR HOST
        1.Glue roller and metering roller are driven by dual independent motors, making adjustment more convenient
        2.Drying roller diameter increased to 800mm, using electromagnetic heating system.
        3.The heating press roller adopts a segmented heating system, efficient and energy-saving
        4.Max pressure of press roller is 12T
        5.Gluing system Teflon process treatment, easy to clean and non-sticky

        CUTTING UNIT
        1.The paper cutter is equipped with a tension controller and an anti-curl device to ensure that the paper is flat and not curled.
        2.The paper cutting part contains grinding wheel, disc knife and chain knife for slitting, meeting customers' requirements for slitting films of different materials
        3.The bounce roller is controlled by an independent motor, and the paper can be separated by using the speed difference
        4.Hot knife low pressure direct heating and slitting without tail film, detecting paper thickness and slitting, accurate and efficient

        NON-STOP COLLECTOR
        1.Adopt pneumatic paper sorting structure to ensure the neatness of the paper and facilitate the next process
        2.with a reduction wheel to prevent the paper from being damaged due to too fast hitting the baffle
        3.Counting electric eye, the number of running paper is displayed on the display screen at the take-up machine, which can be cleared and accumulated
        4.Induction electric eye, sensing the length of the paper, if the length of the paper changes, the belt will accelerate, and the baffle of the take-up machine will overturn and lift the paper

          
          
          
          

        HOME

        PRODUCTS

        INQUIRY

        CONTACT US
        亚洲人成网站18禁止大_成年美女黄网站18禁免费看_亚洲人成网77777亚洲色_欧美成 人版在线